How To Water A Bonsai Plant

Bonsai - Looking for Aquaponics And Hydroponics Systems Today i will give you some info about Bonsai, i was write this article for sharing Article Bonsai, Article current trends in gardening, Article water, I hope this article very helpfull for you

Judul : How To Water A Bonsai Plant
link : How To Water A Bonsai Plant

Bonsai

Watering can be a very critical aspect of bonsai. Too little water can leave you bonsai shredding leaves, branches or even die. Too much water can make the root rot.

Watering frequency:

Watering frequency depends largely on the environment and plant's growth rate.

Like during summers to water twice a day is a normal phenomena. while during winter once a week is the standard. Apart from these two extremes once in a day is quite normal for most of the seasons like spring or autumn.

Having said that sometimes you might have to water it 3 times a day or once in a month it depends on your judgement on plants water needs.

The bottom line is you should make sure that it should not dry out completely or get soggy. Adding a water saucer is a clever choice for bonsai. It works as a self watering container.

Green moss watering:

Planting moss in the bonsai pot actually works very well for bonsai plants. It helps to keep the water inside and prevents faster drying out of the soil. Due to the presence of moss it generally takes more time to absorb water; so you have to add plenty of water to get it enough into the soil. Green moss can cause the water to run off over the edge of the pot. It can also act as a coating.

Watch soil colour before watering:

Watering a bonsai plant is a tricky business and it will take time for you to be good at it. It is said that you need to spend at least 3 years to become a master at watering bonsai. The soil colour, condition represents a lot of facts in bonsai.

Where to water?

Water the soil, with a sprayer apply water in the leaves. To prevent any root damage during watering, use a hose attachment. It would dispense the water softly without disturbing the roots. Use a sprayer to water the leaves.

Express your views regarding the article. Use the comment box below.

Here are some of the Bonsai Watering Cans that are available in Amazon
click here to buy

Watering can be a very critical aspect of bonsai. Too little water can leave you bonsai shredding leaves, branches or even die. Too much water can make the root rot.

Watering frequency:

Watering frequency depends largely on the environment and plant's growth rate.

Like during summers to water twice a day is a normal phenomena. while during winter once a week is the standard. Apart from these two extremes once in a day is quite normal for most of the seasons like spring or autumn.

Having said that sometimes you might have to water it 3 times a day or once in a month it depends on your judgement on plants water needs.

The bottom line is you should make sure that it should not dry out completely or get soggy. Adding a water saucer is a clever choice for bonsai. It works as a self watering container.

Green moss watering:

Planting moss in the bonsai pot actually works very well for bonsai plants. It helps to keep the water inside and prevents faster drying out of the soil. Due to the presence of moss it generally takes more time to absorb water; so you have to add plenty of water to get it enough into the soil. Green moss can cause the water to run off over the edge of the pot. It can also act as a coating.

Watch soil colour before watering:

Watering a bonsai plant is a tricky business and it will take time for you to be good at it. It is said that you need to spend at least 3 years to become a master at watering bonsai. The soil colour, condition represents a lot of facts in bonsai.

Where to water?

Water the soil, with a sprayer apply water in the leaves. To prevent any root damage during watering, use a hose attachment. It would dispense the water softly without disturbing the roots. Use a sprayer to water the leaves.

Express your views regarding the article. Use the comment box below.

Here are some of the Bonsai Watering Cans that are available in Amazon
click here to buy

Root Pruning in Bonsai tree: Essential Part of Bonsai Tree Care

Bonsai - Looking for Aquaponics And Hydroponics Systems Today i will give you some info about Bonsai, i was write this article for sharing Article Bonsai, Article pruning, Article roots, I hope this article very helpfull for you

Judul : Root Pruning in Bonsai tree: Essential Part of Bonsai Tree Care
link : Root Pruning in Bonsai tree: Essential Part of Bonsai Tree Care

Bonsai

This article is the second part of my article titled Pruning in bonsai where i have discussed different types of pruning which are essential part of a bonsai tree care.

Roots are important to any plant and specially to a bonsai tree. It is the part of the plant which is not visible to eyes in normal circumstances but plays the most important role in plant's survival. So when you its your turn to prune roots you should be very careful. I would try to explain the process of Root pruning by answering these following questions:

Why should I prune the roots?

The basic purpose of root pruning is the same as that of the branch pruning. As in case of branch pruning (where small branches starts to develop in place of regular sized ones), Pruning of roots stimulates growths of more smaller roots which are crucial for the look and survival of the plant.

Tap root is vital to the plants which grow in nature. It acts as an anchor for the plant. But in case of bonsai trees this root has very little importance. Here the support is provided form outside (Read wiring in bonsai for details).

Also, the presence of thick root inhibits growth of any other smaller sized roots and thus lead to sparse branches with little foliage. So root pruning is absolutely necessary for the aesthetic look of the plant. It is an integral part of making the bonsai style.

How often to do?

The frequency of pruning is not fixed for every plant. It varies upon the variety and species. Some plants grow very slowly and don't need pruning that often whereas others need it quite a few time in a year as they grow vigorously.

The frequency is also related to pot size and the environment. Smaller the pot more frequent is the pruning.

When to do it?

Before starting root pruning you should consider this. Pruning does hurt water intake capabilities of the plant. So it must be done at a time when the stress on the plant is less; like during the period of quiescence (for tropical plants) or at the time of early spring.

Growth of roots doesn't depend on light. Rather It is only dependent on soil temperature and supply of nutrients in the soil.

How to do it?

Once you understand the concept of root pruning the rest of the bonsai tree care will seem very easy to you.
First you need to know about the equipment. For pruning roots, use a root hook. It is a single tined tool and is probably the best way to untangle the roots with minimal damage. If you don't want to buy it you can prepare it in home too.

You need to let off most of the thick roots and concentrate on the smaller and hairy roots. They are the essential for plant's survival. Bonsai plants require a very shallow root system when compared with other container plants.

Sometimes, especially for a beginner it seems impossible to shift the plant directly into a bonsai pot. This is okay. You can do it step by step. By lowering the depth of the pot over time. Start small and you will progress to severe pruning once you gain confidence.

Don't get tempted to put water into the root ball to remove soil. It might work for some species but for most of them it cause more damage to the finer roots than cleaning the soil.

Hope you like the article. Share your thought with us.

This article is the second part of my article titled Pruning in bonsai where i have discussed different types of pruning which are essential part of a bonsai tree care.

Roots are important to any plant and specially to a bonsai tree. It is the part of the plant which is not visible to eyes in normal circumstances but plays the most important role in plant's survival. So when you its your turn to prune roots you should be very careful. I would try to explain the process of Root pruning by answering these following questions:

Why should I prune the roots?

The basic purpose of root pruning is the same as that of the branch pruning. As in case of branch pruning (where small branches starts to develop in place of regular sized ones), Pruning of roots stimulates growths of more smaller roots which are crucial for the look and survival of the plant.

Tap root is vital to the plants which grow in nature. It acts as an anchor for the plant. But in case of bonsai trees this root has very little importance. Here the support is provided form outside (Read wiring in bonsai for details).

Also, the presence of thick root inhibits growth of any other smaller sized roots and thus lead to sparse branches with little foliage. So root pruning is absolutely necessary for the aesthetic look of the plant. It is an integral part of making the bonsai style.

How often to do?

The frequency of pruning is not fixed for every plant. It varies upon the variety and species. Some plants grow very slowly and don't need pruning that often whereas others need it quite a few time in a year as they grow vigorously.

The frequency is also related to pot size and the environment. Smaller the pot more frequent is the pruning.

When to do it?

Before starting root pruning you should consider this. Pruning does hurt water intake capabilities of the plant. So it must be done at a time when the stress on the plant is less; like during the period of quiescence (for tropical plants) or at the time of early spring.

Growth of roots doesn't depend on light. Rather It is only dependent on soil temperature and supply of nutrients in the soil.

How to do it?

Once you understand the concept of root pruning the rest of the bonsai tree care will seem very easy to you.
First you need to know about the equipment. For pruning roots, use a root hook. It is a single tined tool and is probably the best way to untangle the roots with minimal damage. If you don't want to buy it you can prepare it in home too.

You need to let off most of the thick roots and concentrate on the smaller and hairy roots. They are the essential for plant's survival. Bonsai plants require a very shallow root system when compared with other container plants.

Sometimes, especially for a beginner it seems impossible to shift the plant directly into a bonsai pot. This is okay. You can do it step by step. By lowering the depth of the pot over time. Start small and you will progress to severe pruning once you gain confidence.

Don't get tempted to put water into the root ball to remove soil. It might work for some species but for most of them it cause more damage to the finer roots than cleaning the soil.

Hope you like the article. Share your thought with us.

Wiring The Bonsai

Bonsai - Looking for Aquaponics And Hydroponics Systems Today i will give you some info about Bonsai, i was write this article for sharing Article Bonsai, Article current trends in gardening, Article wiring, I hope this article very helpfull for you

Judul : Wiring The Bonsai
link : Wiring The Bonsai

Bonsai

This is my 3rd article regarding bonsai preparation. After pruning, its time to wire the plant. If you are new to bonsai you may be thinking...

Why should I wire a plant? 

Well, the basic purpose of wiring is to modify the natural arrangement of the branches to grow and to  make our very own signature style. It also keeps the

For most of the plants there are no particular season or time of the year to do the wiring and can be done year long.

How to wire a bonsai plant?

Wiring material:
Most common type of wires are made of copper or aluminium. If you are a beginner, it is advisable to start with the aluminium ones as they are much more easier to work with than the copper wires.
Put a plastic or some kind of fabric around the trunk and the branches to make sure the wire doesn't stuck into the bark.
In some cases, where the trunk is too thick or fragile for bonding, you need to create a loop in the wire and slowly increase or decrease the pressure as the time goes on. This is also called Guy- wiring. 

Caution: Wiring should not be very close as it will affect the sap flow and not too wide otherwise it will loose its purpose.



Wiring the Trunk:
Trunk is the main structure of the plant. To start wiring, you need to choose a wire that is at least 1/3rd times longer than the length of the trunk.
The width of the wire depends on the trunk's width and it should be thicker than those that hold the branches. In case the trunk is very thin, use a thiner wire.
Anchor one side of the wire to the soil or at the bottom of the growing pot and then begin to coil the wire at a 45 degree angle around the trunk. Make the curves narrower while you are moving towards the top.

Wiring of branches:
tension of the branches and maintains the direction of their growth.

Primary Branches: While wiring branches, start working outwards from the trunk and avoid overlapping. Try one piece of wire to bend two branches which are near to each other (it is also called double wiring). You can do this to most of the primary branches. For rest of the branches use separate wires.
Secondary branches: Start this only after finishing the primary branches. The procedure will be the same. Secure the wire by coiling it around a primary or a secondary branch.

Words of caution: Leave the top portion of the plants little loose. These are the portion with soft growth.

How long you need to keep the wire?

The wiring is done for the purpose of styling and it is certainly not very good aesthetically. That is why you don't need to keep the plant wired permanently. How long it should be there? Well, it depends entirely on the plant genre and variety.
With the passage of time the trunk and the branches become thicker and eventually the wire begin to bite into the bark. So keep a close eye on that and as soon as you see any sign of this cut the wire right away.

Words of caution: Don't try to unwind the wires for recycling purposes, it might do more harm than good and can damage the plant permanently.


Got any suggestion? Please use the comment box below.

This is my 3rd article regarding bonsai preparation. After pruning, its time to wire the plant. If you are new to bonsai you may be thinking...

Why should I wire a plant? 

Well, the basic purpose of wiring is to modify the natural arrangement of the branches to grow and to  make our very own signature style. It also keeps the

For most of the plants there are no particular season or time of the year to do the wiring and can be done year long.

How to wire a bonsai plant?

Wiring material:
Most common type of wires are made of copper or aluminium. If you are a beginner, it is advisable to start with the aluminium ones as they are much more easier to work with than the copper wires.
Put a plastic or some kind of fabric around the trunk and the branches to make sure the wire doesn't stuck into the bark.
In some cases, where the trunk is too thick or fragile for bonding, you need to create a loop in the wire and slowly increase or decrease the pressure as the time goes on. This is also called Guy- wiring. 

Caution: Wiring should not be very close as it will affect the sap flow and not too wide otherwise it will loose its purpose.



Wiring the Trunk:
Trunk is the main structure of the plant. To start wiring, you need to choose a wire that is at least 1/3rd times longer than the length of the trunk.
The width of the wire depends on the trunk's width and it should be thicker than those that hold the branches. In case the trunk is very thin, use a thiner wire.
Anchor one side of the wire to the soil or at the bottom of the growing pot and then begin to coil the wire at a 45 degree angle around the trunk. Make the curves narrower while you are moving towards the top.

Wiring of branches:
tension of the branches and maintains the direction of their growth.

Primary Branches: While wiring branches, start working outwards from the trunk and avoid overlapping. Try one piece of wire to bend two branches which are near to each other (it is also called double wiring). You can do this to most of the primary branches. For rest of the branches use separate wires.
Secondary branches: Start this only after finishing the primary branches. The procedure will be the same. Secure the wire by coiling it around a primary or a secondary branch.

Words of caution: Leave the top portion of the plants little loose. These are the portion with soft growth.

How long you need to keep the wire?

The wiring is done for the purpose of styling and it is certainly not very good aesthetically. That is why you don't need to keep the plant wired permanently. How long it should be there? Well, it depends entirely on the plant genre and variety.
With the passage of time the trunk and the branches become thicker and eventually the wire begin to bite into the bark. So keep a close eye on that and as soon as you see any sign of this cut the wire right away.

Words of caution: Don't try to unwind the wires for recycling purposes, it might do more harm than good and can damage the plant permanently.


Got any suggestion? Please use the comment box below.

Pruning in Bonsai

Bonsai - Looking for Aquaponics And Hydroponics Systems Today i will give you some info about Bonsai, i was write this article for sharing Article Bonsai, Article current trends in gardening, Article pruning, I hope this article very helpfull for you

Judul : Pruning in Bonsai
link : Pruning in Bonsai

Bonsai

Pruning is probably the most important part of a bonsai preparation. It is basically done to control plants natural growth and to maintain a proper shape.In this article you will get an idea about different forms of pruning involved in bonsai. This article is a follow up of our earlier article on Bonsai.

Required equipments:

1. A set of scissors or clippers for different parts of the plant viz leaves, small branches, buds etc.
2. A pruning saw for cutting older branches in particular.

Pruning can be of two types:

Structural pruning :this is major form of pruning and are done once more in the lifetime of the plant to undergo some radical structural changes to the plant. In most of the cases it includes removing major branches of the plant. The basic rule of pruning is you should prune “one of two opposite branches” on the trunk. You can always give the shape to your bonsai the way you choose, just remember once you cut a branch from the trunk it will never grow again. So proper decision is the key.

Falcon Pruning Secateurs

Maintenance pruning:this is day to day pruning. The main purpose of this is to restrict irregular growth of different branches (as a result of natural development of the plant).

In bonsai preparation pruning has to be done in many parts of the plant. These includes

Shoots pruning: Pruning of shoots are generally done to inhibit the natural free growth of the plant. But also allows light and air to reach to the lower branches of the plant. Process and frequency may differ from plant to plant depending on its variety or cultivar.

Leaf pruning: This is generally done to the plants with bigger and broader leaves. Clipping down leaves several time will force the plant to grow smaller leaves. You need to remove the leaves from the base just leaving the leaf petiole on the branch. From there smaller shoots and leaves will grow.

Root pruning: It is by far the most difficult part of pruning. Best time to prune roots is at the time of reporting. The seasonality differ from plant to plant. I will not go into details about root pruning it deserves a separate article.

Buds pruning: This form pruning generally has to do with deciduous plants. During the beginning of the spring when the growth starts to appear, pinch the buds from the plant. Sometimes you may have to add some fertilizers to make sure the plant doesn't remain nutrition deficient.

I hope you got an overview about the types of pruning involved in bonsai preparation. Stay tuned for more articles related to bonsai.

Pruning is probably the most important part of a bonsai preparation. It is basically done to control plants natural growth and to maintain a proper shape.In this article you will get an idea about different forms of pruning involved in bonsai. This article is a follow up of our earlier article on Bonsai.

Required equipments:

1. A set of scissors or clippers for different parts of the plant viz leaves, small branches, buds etc.
2. A pruning saw for cutting older branches in particular.

Pruning can be of two types:

Structural pruning :this is major form of pruning and are done once more in the lifetime of the plant to undergo some radical structural changes to the plant. In most of the cases it includes removing major branches of the plant. The basic rule of pruning is you should prune “one of two opposite branches” on the trunk. You can always give the shape to your bonsai the way you choose, just remember once you cut a branch from the trunk it will never grow again. So proper decision is the key.

Falcon Pruning Secateurs

Maintenance pruning:this is day to day pruning. The main purpose of this is to restrict irregular growth of different branches (as a result of natural development of the plant).

In bonsai preparation pruning has to be done in many parts of the plant. These includes

Shoots pruning: Pruning of shoots are generally done to inhibit the natural free growth of the plant. But also allows light and air to reach to the lower branches of the plant. Process and frequency may differ from plant to plant depending on its variety or cultivar.

Leaf pruning: This is generally done to the plants with bigger and broader leaves. Clipping down leaves several time will force the plant to grow smaller leaves. You need to remove the leaves from the base just leaving the leaf petiole on the branch. From there smaller shoots and leaves will grow.

Root pruning: It is by far the most difficult part of pruning. Best time to prune roots is at the time of reporting. The seasonality differ from plant to plant. I will not go into details about root pruning it deserves a separate article.

Buds pruning: This form pruning generally has to do with deciduous plants. During the beginning of the spring when the growth starts to appear, pinch the buds from the plant. Sometimes you may have to add some fertilizers to make sure the plant doesn't remain nutrition deficient.

I hope you got an overview about the types of pruning involved in bonsai preparation. Stay tuned for more articles related to bonsai.

Bonsai: The Japanese Miniature Plantation

Bonsai - Looking for Aquaponics And Hydroponics Systems Today i will give you some info about Bonsai, i was write this article for sharing Article basics, Article Bonsai, Article current trends in gardening, Article gardening concepts, Article Know How, I hope this article very helpfull for you

Judul : Bonsai: The Japanese Miniature Plantation
link : Bonsai: The Japanese Miniature Plantation

Bonsai

Beautiful bonsai trees --- Buy now

Bonsai is a thousand years old Japanese culture of growing plants which has one of the unique aesthetics of its own. The word Bon means a small tray or a low sided pot and sai refers to planting. So the term bonsai if translated in English means planting in tray. It is the miniature form of a fully grown tree grown in a small pot.

Unlike other gardening practices, Bonsai is not for growing foods, medicines or park sized landscaping rather it is a pleasant exercise for effort and ingenuity. It is the delight gained from recreating the plants as seen in the nature in miniature form.

Though some particular species of plant became very popular because of smaller leaves and other attractive features, you can create bonsai with literally any perennial trees or shrubs that produces true branches and can sustain crown and root pruning.

The time and cost of raising a particular bonsai varies from species to species. There are many ways to start a bonsai. Let me mention few of them to you.

If you are not a very patient person you can buy a previously trained bonsai. It will definitely reduce your time and effort and particularly ideal for the beginners.

You can also find wild plant in its natural surroundings which has been shaped by mother nature. You can start from cutting of the heridetically identical trees. these have better success rates when comparing with the process of starting from the seeds. One of the plus points of staring a bonsai from seeds is you can create rare varieties of bonsai with very small price and huge production. Grafting methods are also in use for creating your favorite bonsai. 

An aesthetically superior bonsai needs to be healthy. The proper combination of soil, water, air and sunlight is very critical for the growth of a bonsai. There are no fixed formula for this it varies species to species, climate to climate. You need to do some trial and error before fixing the optimum combination. I have written two blog earlier on watering techniques and the role of sunlight in plantation you can check these two for your reference also.

Trunk is the most appealing part of the bonsai. You can work on making the trunk well-formed and with smooth curves. Also you can adjust branch locations, foliage distribution etc to give your bonsai much more attractive look. Along with the trunk roots also create a natural beauty for the bonsai. A surface root structure called nebari is always a defining point in bonsai.

The bending of trunks and branches is called wiring. You have to do wiring at the very young stages of the plant to give it a shape of a tree. These have to be done until you reach your final shape of the bonsai. To keep the size of the plant to a miniature form you need to continuously do pruning. Pruning had to be done on the branches, leaves, buds etc. Pruning of the roots have to be done with proper care and at the time of re-potting. A detailed article on different types of pruning is here

Bonsai basically is an outdoor activity. Though it can be grown indoor it is quite difficult and its success is limited to the tropical countries. But if you are determined to place it indoor it will advisable to start with a plant like Ficus. They can withstand a lot of abuse and not very sensitive to the surroundings compared to the other plants. It is also cheap and easy to find.

If you got your motivation level rising to do a bonsai after reading this article, I would suggest you to do a through research on the same before jumping in. Here is one great resource you can refer to for more detailed stuffs which will give you a step by step guide to bonsai. 

All the best.

Beautiful bonsai trees --- Buy now

Bonsai is a thousand years old Japanese culture of growing plants which has one of the unique aesthetics of its own. The word Bon means a small tray or a low sided pot and sai refers to planting. So the term bonsai if translated in English means planting in tray. It is the miniature form of a fully grown tree grown in a small pot.

Unlike other gardening practices, Bonsai is not for growing foods, medicines or park sized landscaping rather it is a pleasant exercise for effort and ingenuity. It is the delight gained from recreating the plants as seen in the nature in miniature form.

Though some particular species of plant became very popular because of smaller leaves and other attractive features, you can create bonsai with literally any perennial trees or shrubs that produces true branches and can sustain crown and root pruning.

The time and cost of raising a particular bonsai varies from species to species. There are many ways to start a bonsai. Let me mention few of them to you.

If you are not a very patient person you can buy a previously trained bonsai. It will definitely reduce your time and effort and particularly ideal for the beginners.

You can also find wild plant in its natural surroundings which has been shaped by mother nature. You can start from cutting of the heridetically identical trees. these have better success rates when comparing with the process of starting from the seeds. One of the plus points of staring a bonsai from seeds is you can create rare varieties of bonsai with very small price and huge production. Grafting methods are also in use for creating your favorite bonsai. 

An aesthetically superior bonsai needs to be healthy. The proper combination of soil, water, air and sunlight is very critical for the growth of a bonsai. There are no fixed formula for this it varies species to species, climate to climate. You need to do some trial and error before fixing the optimum combination. I have written two blog earlier on watering techniques and the role of sunlight in plantation you can check these two for your reference also.

Trunk is the most appealing part of the bonsai. You can work on making the trunk well-formed and with smooth curves. Also you can adjust branch locations, foliage distribution etc to give your bonsai much more attractive look. Along with the trunk roots also create a natural beauty for the bonsai. A surface root structure called nebari is always a defining point in bonsai.

The bending of trunks and branches is called wiring. You have to do wiring at the very young stages of the plant to give it a shape of a tree. These have to be done until you reach your final shape of the bonsai. To keep the size of the plant to a miniature form you need to continuously do pruning. Pruning had to be done on the branches, leaves, buds etc. Pruning of the roots have to be done with proper care and at the time of re-potting. A detailed article on different types of pruning is here

Bonsai basically is an outdoor activity. Though it can be grown indoor it is quite difficult and its success is limited to the tropical countries. But if you are determined to place it indoor it will advisable to start with a plant like Ficus. They can withstand a lot of abuse and not very sensitive to the surroundings compared to the other plants. It is also cheap and easy to find.

If you got your motivation level rising to do a bonsai after reading this article, I would suggest you to do a through research on the same before jumping in. Here is one great resource you can refer to for more detailed stuffs which will give you a step by step guide to bonsai. 

All the best.